Enhancing and protecting Single Stage Paint finishes with Protecticoat

Single stage paint, known for its simplicity and cost-effectiveness, it is a popular choice. However, to maintain the aesthetic appeal and longevity of single stage paint finishes, the application of a high-quality protective coating is essential. This protective layer not only enhances the visual allure of the paint but also provides a shield against various environmental factors that can degrade its quality over time.

Protecticoat Benefits

Protecticoat serves as a crucial line of defense against the harsh elements that vehicles encounter daily. Factors such as UV rays, bird droppings, tree sap, road salts, and environmental contaminants can contribute to paint degradation, leading to oxidation, fading, and loss of gloss. Applying Protecticoat not only preserves the luster of the single stage paint but also guards against these external threats, extending the life of the paintwork.

Easy Application
Protecticoat coating has a simple process that only requires you to clean the surface of oils, dirt, and debris, let it dry, then spray in light coats until the desired finish is achieved.
Year-Round Protection
Protecticoat is made with the maximum amount of UV protection to protect your projects from sunlight exposure, salt spray, and other atmospheric contaminants.
Long Lasting
Protecticoat coating is warrantied for one year. The more favorable the conditions, the longer the life. The harsher the conditions, the shorter the life.

See Our Results

What You Need To Know Before You Buy Protecticoat?

How much do I need?

Each 14 oz. aerosol can covers about 60 square feet, while each gallon of our 1 and 5 gal. cans covers about 1,200 square feet

How do I store Protecticoat?

Do not store in direct sunlight or where temperatures can exceed 140 degrees Fahrenheit. Do not allow the product to freeze while in the containers.

How long does Protecticoat last?

Protecticoat coating is warrantied for one year. Like any protective coating product, the life of the coating is subject to ambient conditions: The harsher the conditions, the shorter the life. The more favorable the conditions, the longer the life. At such time that the product needs to be reapplied, no sanding or similar preparation is necessary. Simply prep as you did before the first coat by cleaning thoroughly, dry and apply. The product will go over and blend with itself.

How long after application do I have to wait to use my equipment?

Once Protecticoat is applied it will need to cure for 24 hours before the equipment can be used.

Do I need sand chipped paint before using?

Your RV will need to be properly cleaned and dried before you can apply Protecticoat. You do not have to sand down the paint; however, we recommend removing any large pieces of paint that are peeling off.

What happens if I get it on the window by mistake?

You can clean up the solution using Acetone or a comparable solvent.

Is Protecticoat for all Single Stage Paint?

No. Protecticoat is designed to restore the finish and luster to used units with a faded or discolored appearance. Protecticoat will not take the place of painting or clear coating, hence the vast cost differences between the processes. The product may not work on units that have had another sealer put on the surface at a prior time. If there is oxidation and the surface still exhibits a mirror-like appearance, there has most likely been another sealer already applied. Do not use on clear coat, plexiglass or FRP (Fiberglass Reinforced Plastic).