Each 14 oz. aerosol can covers about 60 square feet, while each gallon of our 1 and 5 gal. cans covers about 1,200 square feet

Do not store in direct sunlight or where temperatures can exceed 140 degrees Fahrenheit. Do not allow the product to freeze while in the containers.

Protecticoat coating is warrantied for one year. Like any protective coating product, the life of the coating is subject to ambient conditions: The harsher the conditions, the shorter the life. The more favorable the conditions, the longer the life. At such time that the product needs to be reapplied, no sanding or similar preparation is necessary. Simply prep as you did before the first coat by cleaning thoroughly, dry and apply. The product will go over and blend with itself.

Once Protecticoat is applied it will need to cure for 24 hours before the equipment can be used.

Your equipment will need to be properly cleaned and dried before you can apply Protecticoat. You do not have to sand down the equipment; however, we recommend removing any large pieces of paint that are peeling off.

You can clean up the solution using Acetone or a comparable solvent.

Protecticoat's protective coating can be used on the following commercial equipment:

• School buses
• Playgrounds
• Benches
• Tables
• Chairs
• Metal siding
• and more!

Do not use on clear coat, plexiglass, or FRP (fiberglass reinforced plastic).